top of page

Mid Fire Glaze Cone 6 Program Firing

Mid fire cone 6 glaze program firing for electric kilns.

    1. Push “STOP” to clear previous firing and screen will flash “IDLE”.

    2. Push “CONE FIRE”

    3. PRHT 0.00, ENTER

    4. CONE 6, ENTER

    5. SPd “MED”, ENTER

    6. HOld 00.00 (0 min), ENTER

    7. “CPL”, then “IDLE”

    8. “REVIEW” to double check program

    9. Make sure lid is latched and all peephole plugged

    10. “START”
bottom of page